Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Operating Menu; Menu Level → Level (LVL N)

Operating menu Prosonic S FMU90 PROFIBUS DP
94 Endress+Hauser
14 Operating menu
14.1 Menu "Level → Level (LVL N)"
14.1.1 Submenu "Basic setup"
Parameter set L1003 "LVL N sensor sel."
• Input
• Sensor selection
• Detected
Parameter set L1004 "LVL N appl. param."
• Tank shape
• Medium property
• Process conditions
Parameter set L1005 "LVL N empty cal."
Empty E
Parameter set L 1006 "LVL N full cal."
• Full F
• Blocking distance
Parameter set L1007 "LVL N unit"
• Unit level
• Level N
• Distance
Parameter set L1008 "LVL N linearisat."
• Type
• Customer unit
• Customized text
• Max. scale
• Diameter
• Intermediate height (H)
• Mode
• Edit
• Status table
Parameter set L100B "LVL N check value"
• Act. distance N
• Check distance
Parameter set L100B "LVL N dist. map."
• Act. distance N
• Range of mapping
• Start mapping
• Status
Parameter set L100C "LVL N status"
• Level N
• Act. distance N
• Status
14.1.2 Submenu "Extended calibr."
Parameter set L1016 "LVL N dist. map."
• Act. distance N
• Range of mapping
• Start mapping
• Status