Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Menu Flow Counter; Menu Safety Settings

Operating menu Prosonic S FMU90 PROFIBUS DP
98 Endress+Hauser
14.3.3 Submenu "Simulation"
Parameter set F1600 "Backw. simulation"
• Simulation
• Sim. level value
14.4 Menu "Flow counter"
Navigation to the submenu:
Flow → Flow counter
14.4.1 Submenu "Totalizer"
Parameter set F1202 "Totalizer N"
• Allocation
• Counter unit
Parameter set F1203 "Totalizer N"
• Value
• Overflow x 10^7
Parameter set F1204 "Totalizer N"
Failure mode
14.4.2 Submenu "Daily counter"
Parameter set F1102 "Daily counter N"
• Allocation
• Counter unit
Parameter set F1103 "Daily counter N"
• Value
• Overflow x 10^7
• Reset
Parameter set F1104 "Daily counter N"
Failure mode
Parameter set F1105 "Daily counter N"
Only for devices with additional digital inputs (FMU90-********B***)
• External reset
• External start
14.5 Menu "Safety settings"
Parameter set AX101 "Output on alarm"
• Output N
• Output value N
Parameter set AX102 "Outp. echo loss"
• Level N
• Ramp level N
• Value level N
• Flow N
• Value flow N
Parameter set AX103 "Delay echo loss"
Delay Sensor N
Parameter set AX104 "Safety distance"
Saf. dist.sen N