Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Menu Backwater

Prosonic S FMU90 PROFIBUS DP Operating menu
Endress+Hauser 97
14.3 Menu "Backwater"
Navigation to the submenu
Flow → Flow 1+ backw. → Backwater
14.3.1 Submenu "Basic setup"
Parameter set F1304 "Backwater sensor selection"
• Input
• Sensor selection
• Detected
Parameter set F1305 "Backw. empty cal."
• Empty E
• Blocking distance
Parameter set F1306 "Backwater detection"
Ratio B
Parameter set F1306 "Dirt detection"
Ratio D
Parameter set F1307 "Backwater"
• Act. backw. level
• Act. flow level
• Actual ratio
• Flow 1
Parameter set F1308 "Backwater check value"
• Distance
• Check distance
Parameter set F1309 "Backwater mapping"
• Distance
• Range of mapping
• Start mapping
• Status
14.3.2 Submenu "Extended calibr."
Parameter set F1500 "Backwater mapping"
• Distance
• Range of mapping
• Start mapping
• Status
Parameter set F1501 "Backw dist. corr."
Sensor offset
Parameter set F1502 "Backw. correction"
Offset
Parameter set F1504 "Backw. block.dist."
Blocking distance
Parameter set F1503 "Backw. limitation"
• Limitation
• Upper limit
• Lower limit
Parameter set F1504/F1505 "Backw. ext. input M"
• Input M
• Function
• Value