Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Menu Relay;Controls; Submenu Pump Control N (Standard - Limit Control)

Prosonic S FMU90 PROFIBUS DP Operating menu
Endress+Hauser 99
Parameter set AX105 "In safety dist."
• In saf. dist.s N
• Reset sen N
Parameter set AX107 "React. high temp."
• Overtemp. sen. N
• Max. temp. sen. N
Parameter set A0000 "Defect temp. sen."
Def. temp. sen. N
Parameter set A0000 "Relay delay"
Start delay relay
14.6 Menu "Relay/controls"
14.6.1 Submenu "Pump control N" (standard - limit control)
Valid for:
• FMU90-*1**********
• FMU90-*2**********
Parameter set R1300 "Pump control N"
• Reference
• Number of pumps
Parameter set R1301 "Pump control N"
Function = Limit control
Parameter set R1302 "Pump control N"
Pump M
Parameter set R1303 "Pump M /control N"
• Switch-on point
• Switch-off point
• Switch-on delay
• Alternate
• Crust reduction
Parameter set R1304 "Pump M /control N"
• Backlash interval
• Backlash time
• Failure mode
Parameter set R1306 "Relay allocation → Relay K"
• Function
• Invert
14.6.2 Submenu "Pump control N" (standard - pump rate control)
Valid for:
• FMU90-*1**********
• FMU90-*2**********
Parameter set R1300 "Pump control N"
• Reference
• Number of pumps
Parameter set R1301 "Pump control N"
Function = Pump rat. contr.