Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Submenu Relay Configurat. → Relay N (Function: Alarm;Diagnost.); Submenu Relay Configurat. → Relay N (Function: Fieldbus); Overview of the Output;Calculat. Menu (PROFIBUS DP)

Prosonic S FMU90 PROFIBUS DP Operating menu
Endress+Hauser 105
Parameter set R1204 "Relay N"
• Invert
• Failure mode
14.6.16 Submenu "Relay configurat. → Relay N" (function: alarm/
diagnost.)
Parameter set R2103 "Relay N"
• Function → Alarm/diagnost.
• Alarm relay
• Diagnostics
• Backw. alarm
• Dirt alarm
• Allocation M
Parameter set R2104 "Relay N"
Invert
14.6.17 Submenu "Relay configurat. → Relay N" (function: fieldbus)
Parameter set R1203 "Relay N"
Function → Fieldbus
Parameter set R201E "Function"
• None
• DO1
• ...
• DO10
14.6.18 Submenu "Relay simulation"
Parameter set R2106 "Relay N"
• Simulation
• Simulation value
14.7 Overview of the "Output/calculat." menu (PROFIBUS
DP)
14.7.1 Submenu "Analog input"
Parameter set OXA01 "Analog input N"
• Measured value N
• Value
• Status
14.7.2 Submenu "Digital input"
Parameter set O1B03 "Digital input N"
• Allocation
• Value
• Status
14.7.3 Submenu "PROFIBUS DP"
Parameter set O1C01 "PROFIBUS DP"
• Profile version
• Instrument address
• Ident number