Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Page 96

Operating menu Prosonic S FMU90 PROFIBUS DP
96 Endress+Hauser
Parameter set F1005 "Flow N"
• Flow N
• Level
• Distance
Parameter set F1006 "Flow N check value"
• Distance
• Check distance
Parameter set F1008 "Flow N mapping"
• Distance
• Range of mapping
• Start mapping
• Status
Parameter set "Flow N status"
• Level
• Distance
• Flow N
• Status
14.2.2 Submenu "Extended calibr."
Parameter set F1010 "Flow N mapping"
• Distance
• Range of mapping
• Start mapping
• Status
Parameter set F1011 "Flow N low cut off"
• Low flow cut off
• Flow N
Parameter set F1012 "Flow N dist. corr."
• Correction
• Flow N
Parameter set F1013 "Flow N level corr."
• Offset
• Flow N
Parameter set F1016 "Flow N blocking distance"
Blocking distance
Parameter set F1014 "Flow N limitation"
• Limitation
• Upper limit
• Lower limit
Parameter set F1015/F1016 "Flow N ext. input M"
• Input M
• Function
• Value
14.2.3 Submenu "Simulation"
Parameter set F1020 "Flow N simulation"
• Simulation
• Sim. level value
• Sim. flow Value