Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Page 46

Operating options Prosonic S FMU90 PROFIBUS DP
46 Endress+Hauser
Scroll symbols
Scroll list available
Is displayed if the picklist contains more options than can be shown on the display. All the
options in the list can be displayed by pressing or repeatedly.
Navigation in the envelope curve display (select the "Cyclic" display format)
•
Move left
•
Move right
•
Zoom in
•
Zoom out
LED for operating state
• Lit green
Normal operation; no errors detected
• Flashes red
Warning: an error has been detected, but measurement continues. The reliability of the
measured value cannot be guaranteed.
• Lit red
Alarm: an error has been detected. Measurement is interrupted. The measured value
adopts the value specified by the user ("Output on alarm").
• Off
No supply voltage.
Light emitting diodes for relays
• Lit yellow
Relay energized
• Off
Relay de-energized (quiescent state)
Keys (soft key operation)
The current key function is indicated by soft key symbols above the key.
•
Moves the selection bar downwards in a picklist.
•
Moves the selection bar upwards in a picklist.
•
• Opens the selected submenu, parameter set or parameter.
• Confirms the edited parameter value.
•
Goes to the previous parameter set within the submenu.
•
Goes to the next parameter set within the submenu.
•
Selects the option in a picklist which is currently marked by the selection bar.
•
Increases the selected digit of an alphanumeric parameter.
•
Decreases the selected digit of an alphanumeric parameter.