Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Error Codes

Diagnostics and troubleshooting Prosonic S FMU90 PROFIBUS DP
82 Endress+Hauser
Error in the Flow Block (FS)
• W 0x 602
Flow: BAD
• W 0x 603
Flow: BAD
• A 0x 605
Flow: BAD
• A 0x 606
Flow: BAD
• W 0x 612
Flow: BAD
• W 0x 613
Flow: BAD
• W 0x 803
Flow: UNCERTAIN
• W 0x 804
Flow: UNCERTAIN
Error in the Backwater Block (FB)
• W 0x 691
Ratio: GOOD
• W 0x 692
Ratio: GOOD
Error in the Relay Block (RE)
• W 0x 620
Switch state: BAD
• W 0x 807
Switch state: UNCERTAIN
Error in the Calculation Blocks (SL, AL, DL, LD, SF, AF, DF, FD)
A 00 820-832
Total: BAD
Mean: BAD
10.2.5 Error codes
Meaning of the error codes
• Digit 1:
Type of error
• A: alarm
• W: warning
• E: error (the error behavior is defined by the user.)
• Digits 2 and 3:
Input or output channel
"00" means that the error does not refer to a specific channel.
• Digits 4 to 6:
Error code according to the following table