Endress+Hauser Prosonic S FMU90 PROFIBUS DP - Page 92

Accessories Prosonic S FMU90 PROFIBUS DP
92 Endress+Hauser
13.2.3 Adapter plate for remote display
1
2
A0035916
 65 Use of adapter plate
1 Remote display of Prosonic S FMU9x with adapter plate
2 Installation opening of the remote display of the FMU86x predecessor transmitter
To mount the remote display of the Prosonic S FMU9x in the housing of the larger remote
display of the FMU86x predecessor
• Dimensions: 144 x 144 mm (5.7 x 5.7 in)
• Material: 304 (1.4301)
• Order number: 52027441
13.2.4 HAW562 surge arrester
Reduces residual voltages from upstream lightning arresters; limits surges induced or
generated in the system
Additional information: Technical Information TI01012K
13.2.5 Extension cables for sensors
• Maximum permissible total length (sensor cable + extension cable): 300 m (984 ft)
• The sensor cable and extension cable are the same type of cable.
FDU90/FDU91 without sensor heater
• Cable type: LiYCY 2x(0.75)
• Material: PVC
• Ambient temperature:
• Order number: 71027742
FDU90/FDU91 with sensor heater
• Cable type: LiYY 2x(0.75)D+2x0.75
• Material: PVC
• Ambient temperature:–40 to +105 °C (–40 to +221 °F)
• Order number: 71027746
FDU92
• Cable type: LiYCY 2x(0.75)
• Material: PVC
• Ambient temperature:–40 to +105 °C (–40 to +221 °F)
• Order number: 71027742
FDU91F/FDU93/FDU95
• Cable type: LiYY 2x(0.75)D+1x0.75
• Material: PVC
• Ambient temperature:–40 to +105 °C (–40 to +221 °F)
• Order number: 71027743