Operating Instructions Raman Rxn2
10 Endress+Hauser
3.1.3 The Raman Rxn2 starter configuration
The standard Raman Rxn2 starter configuration is the analyzer with a single Rxn-10 Raman spectroscopic probe.
There is an optional upgrade to configure the analyzer with up to four channels, and the analyzer is compatible with
the full range of Endress+Hauser liquid or bioprocessing probes. The Raman Rxn2 starter configuration is only
available with a 785 nm excitation wavelength.
The Raman Rxn2 starter configuration is designed for cart-portable or benchtop uses such as material quality,
reaction monitoring, basic science research, quality assurance, and unknowns identification. The variety of
non-contact or immersion optics compatible with the Rxn-10 probe provides sampling flexibility to support a variety
of applications.
3.2 Raman RunTime software overview
Raman RunTime embedded software is the control platform for the suite of Raman Rxn analyzers. Raman RunTime
software is intended for easy integration with standard multivariate analysis and automation platforms to enable a
real-time, in situ process monitoring and control solution. Raman RunTime presents an OPC and Modbus interface,
which provides clients with analyzer data as well as analyzer control functions. Raman RunTime is fully embedded
into Raman Rxn analyzers. Refer to the Raman RunTime Operating Instructions (BA02180C) for descriptions of
analyzer operations including analyzer operation, calibration, data models, and error reports.
To Next Page
Loading...
Need help?
General
