Operating Instructions Raman Rxn2
14 Endress+Hauser
4 Incoming product acceptance and identification
4.1 Incoming acceptance
1. Verify that the packaging is undamaged. Notify the supplier of any damage to the packaging. Keep the damaged
packaging until the issue has been resolved.
2. Verify that the contents are undamaged. Notify the supplier of any damage to the delivery contents. Keep the
damaged goods until the issue has been resolved.
3. Check that the delivery is complete and nothing is missing. Compare the shipping documents with your order.
4. Pack the product for storage and transportation in such a way that it is protected against impact and moisture.
The original packaging offers the best protection. Make sure to comply with the permitted ambient conditions.
If you have any questions, refer to our website (https://endress.com/contact) for the list of local sales channels in
your area.
Incorrect transportation can damage the analyzer.
Always use a lifting truck or a forklift to transport the analyzer.
4.1.1 Nameplate
The nameplate located on the rear of the analyzer provides the following information about your device:
• Manufacturer contact information
• Laser radiation notice
• Electric shock notice
• Model number
• Serial number
• Wavelength
• Maximum power
• Build month
• Build year
• Patent information
• Certification information
Compare the information on the nameplate with the order.
4.1.2 Identifying the product
The order code and serial number of your product can be found in the following locations:
• On the nameplate
• In the delivery papers
4.1.3 Manufacturer address
Endress+Hauser
371 Parkland Plaza
Ann Arbor, MI 48103 USA
To Next Page
Loading...
