Endress+Hauser Raman Rxn2 - Product Design

Raman Rxn2 Operating Instructions
Endress+Hauser 11
3.3 Product design
3.3.1 Front panel
On the front panel of the instrument are the standard user interfaces. These include the main ON/OFF power switch,
the laser ON/OFF key switch, light emitting diode (LED) indicators, and a universal serial bus (USB) 3.0 port.
Figure 1. Front panel of a Raman Rxn2 four-channel analyzer
#
Name
Description
1
Laser key switch
The laser key switch turns the laser on and off. The Red LED indicator adjacent to the laser
key switch indicates the laser power status. To activate turn the key to the ON position.
2
Main power switch
The main power switch turns the instrument on and off, which includes the laser regardless
of the position of the laser key switch. The Power push button incorporates a Blue LED in
the shape of a power symbol, which indicates the system power status. The Power push
button will communicate error conditions using blink codes when embedded software is not
able to communicate them.
To turn the instrument on, press and release the Power button once. To turn a responsive
instrument off, shut down using Raman RunTime. If the instrument is unresponsive, it may
be powered down using a long 10 second press and hold of the Power button.
3
Probe connection status
indicators
The bank of Yellow LED indicators between the laser key and USB 3.0 port indicates the
physical connection status of the probes. While the Raman Rxn2 four-channel configuration
front panel has four LED indicators, the front panel of the Raman Rxn2 hybrid configuration
has only two LED indicators, and the front panel of the Raman Rxn2 single-channel
configuration has only one LED indicator.
4
USB 3.0 port
The USB 3.0 port is intended to obtain diagnostic exports from the instrument using a USB
flash drive.
A0054420
1
3
4
2