Operating Instructions Raman Rxn2
4 Endress+Hauser
1 About this document
1.1 Warnings
Causes (/consequences)
Consequences of non-compliance (if applicable)
‣ Corrective action
This symbol alerts you to a dangerous situation. Failure to avoid the
dangerous situation can result in a fatal or serious injury.
Causes (/consequences)
Consequences of non-compliance (if applicable)
‣ Corrective action
This symbol alerts you to a dangerous situation. Failure to avoid this situation
can result in minor or more serious injuries.
Cause/situation
Consequences of non-compliance (if applicable)
‣ Action/note
This symbol alerts you to situations which may result in damage to property.
1.2 Symbols on the device
The Laser Radiation symbol is used to alert the user to the danger of exposure to hazardous visible laser radiation
when using the Raman Rxn2 system.
The High Voltage symbol that alerts people to the presence of electric potential large enough to cause injury or
damage. In certain industries, high voltage refers to voltage above a certain threshold. Equipment and conductors that
carry high voltage warrant special safety requirements and procedures.
The CSA Certification Mark indicates that the product was tested against and met the applicable North American
standards requirements.
The WEEE symbol indicates that the product should not be discarded as unsorted waste but must be sent to separate
collection facilities for recovery and recycling.
The CE Marking indicates conformity with health, safety, and environmental protection standards for products sold
within the European economic area (EEA).
1.3 U.S. export compliance
The policy of Endress+Hauser is strict compliance with U.S. export control laws as detailed on the website of the
Bureau of Industry and Security at the U.S. Department of Commerce.
To Next Page
Loading...
