Endress+Hauser Raman Rxn2 - Raman Rxn2 Hardware Components

Operating Instructions Raman Rxn2
32 Endress+Hauser
Figure 24. Embedded controller locked in service position
#
Description
1
Interlock IS barrier
2
Embedded controller backup battery
7.4 Raman Rxn2 hardware components
7.4.1 Laser
The laser used in the Raman Rxn2 is a special version of Endress+Hauser’s Class 3B laser. It has a lockable injector
that requires no routine adjustment.
The laser can be turned on and off using the LASER ENABLE switch on the front of the base unit at any time while
the Raman Rxn2 is operating.
7.4.1.1 Laser apertures
Apertures for laser emission are found in the following places on and within the Raman Rxn2:
• Probe head
• Connection panel
• Calibration module
• Laser
1
2
A0048615