Technical alterations reserved!
Mechanical
construction
Dimansions H: 48 mm, W: 96 mm, D: 150 mm
Weight 600 g
Materials Housing front: Die cast aluminium
Housing casing: Galvanised sheet steel
Housing rear panel: Plastic ABS
Electrical
connection
Plug on scew terminals, size 1.5 mm² solid, 1.0 mm²
multi core with ferrule
Display and
operation level
Display LED display, 2 colour
numeric display: 5 x 7 segment
(red or green, 13 mm)
Bargraph display: 12 element (yellow)
Set point infringement: 4 x 1 segment (yellow)
Display range -19999 to +99999
Offset -19999 to +99999
Operation 3 push button operation (-/+/E) and/or software
Interface RS232, on the rear panel, 3.5 mm stereo socket
Set point
function
Mode Off, minimum, maximum safety, alarm
Number 2
Display 2 LED per set point
Scan rate 1s
Power supply
Power supply 90 to 250 V
AC
, 50/60 Hz
18 to 36 V
DC
,20to28V
AC
, 50/60 Hz
Power
consumption
4VA
Fuse 315 mA slow blow (90 to 250 V
AC
),
1Aslowblow(18to36V
DC
)
Certification
CE mark Directives 89/336/EWG and 73/23/EWG
GL-Marine
approval
Germanische Lloyd / marine approval
Application
conditions
Normal mode
noise rejection
60 dB at measurement range 1/10, 50/60 Hz
Process display
76
To Next Page
Loading...
