5.7 Service parameters
Parameter Setting up selections
Default
settings
Actual
Service Code
SCODE
Operation address for the
customer service
parameter release code
-----
SERV
Parameter Setting up selections
Default
settings
Actual
* Sensor value
1 to 32
Input of sensor value of
the analogue input in
engineering units
(X-value)
Value:
Sensor scale 0%
(
Sc LO)
to
Sensor scale 100%
(
Sc HI)
-----
In order to delete the linearization point the value “-----” can be set up.
Keep the “+” push button held down so long until the value appears.
* Display value
Y1 to Y32
Input of the sensor value
allocated display value
(Y-value)
Value range:
-19999 to 99999
00000
NO1 to
NO32
Process display
64
EN-RIA02.CHP
Thu Jan 11 14:04:55 2001
Farbprofil: Deaktiviert
Komposit Standardbildschirm
To Next Page
Loading...
