Endress+Hauser ria45 - Relay Function Settings

RIA45 Appendix
Endress+Hauser 65
Submenu "Relay 1"/"Relay 2"
Navigation

Setup → Relay 1/Relay 2
Additional information Settings for relay 1 or relay 2
Source
Navigation

Setup → Relay 1/Relay 2 → Source
Description Selects the source for the relay
Options off
Analog input 1
Analog input 2
Calc value 1
Calc value 2
Error
Factory setting off
Function
Navigation

Setup → Relay 1/Relay 2 → Function
Description Function of the relay
Options Min
Max
Gradient
Inband
Outband
Factory setting Min
Setpoint
Navigation

Setup → Relay 1/Relay 2 → Setpoint
Description Switching threshold for relay
User entry Numerical value
1)
Factory setting 0
Setpoint 2
Navigation

Setup → Relay 1/Relay 2 → Setpoint 2
Description Second switching threshold for relay.
User entry Numerical value
1)
Factory setting 0
Additional information Only for the inband and outband functions.
Time base
Navigation

Setup → Relay 1/Relay 2 → Time base