Endress+Hauser ria45 - Expert Input Settings

RIA45 Appendix
Endress+Hauser 69
Submenu "Analog in 1"/"Analog in 2"
Navigation

Expert → Input → Analog in 1/Analog in 2
Description Settings for the analog inputs.
Additional information The following parameters are available for analog input 1 and analog input
2.
Bar 0%
Navigation

Expert → Input → Analog in 1/Analog in 2 → Bar 0%
Description Configures the 0%-value for the bar graph
User entry Numerical value
1)
Factory setting 0
Bar 100%
Navigation

Expert → Input → Analog in 1/Analog in 2 → Bar 100%
Description Configures the 100%-value for the bar graph
User entry Numerical value
1)
Factory setting 100
Decimal places
Navigation

Expert → Input → Analog in 1/Analog in 2 → Decimal places
Description Configures the number of decimal places for the display
Options XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Factory setting XXX.XX
Damping
Navigation

Expert → Input → Analog in 1/Analog in 2 → Damping
Description Configures the damping for the input signal. Entry in steps of 0.1 s from
0.0 s to 999.9 s.
User entry Numerical value
1)
Factory setting 0.0 for current / voltage
1.0 for temperature inputs
Failure mode
Navigation

Expert → Input → Analog in 1/Analog in 2 → Failure mode