Endress+Hauser RMA 422 - 4.4 Fast Measured Value Display Function; Quickly Viewing Process Measurements

Ç Enter push button: (option)
Entry into the setting up menu
- Selection of operating functions within a function group.
- Saving set up data.
È +/- push buttons: (option)
- Selection of function groups within the menu.
- Setting up parameters and numbers (if the push button is
continuously held down then the speed of the number change
on this display is increased.)
4.2 Setting up using the operating menu
Ê Enter the operating menu.
Ë Menu select function group (selection using the +/- push
buttons).
Ì Selecting operating functions.
Í Parameter entry in editor mode
(enter/select data using +/- and acknowledge using “E”).
Î Return from editor mode or operation function to a function
group. A return to the home position can be made by pushing
the +/- keys a number of times. Before returning a query is
made asking if the set up data is to be saved or ignored.
Ï Direct return to the home position. Before returning a query
is made asking if the set up data is to be saved or ignored.
Ð Query whether data is to be saved (selection YES/NO with
+/- push button and acknowledge with “E”).
E
E
E
+
+
+
+
+
E
E
E
>3s
>3s
E E E
1
2
5
5
7
6
5
3
4
+
Menu
Function group
Operating function
-
-
-
-
-
-
Q-SET
Process transmitter
46