Endress+Hauser RMA 422 - 5. Operating Parameter Description; 5.1 Analogue Input Configuration

4.4 The “Fast measured value display” function”
Fast information from the process is very important. This
includes the display of individual measurements. The display
always shows the measurement that has been set with the
DISOW parameter (see chapter 5.3).
A different measured value can be displayed by operating the
(+) or (-) push buttons. The original value is displayed after
approx. 10 seconds.
+
+
-
-
Actual
Meas. Value
Reference value
display of the
actual meas. value
Select new
reference value
Display selected
meas. value
or
or
or
Approx. 10 sec
-
+
Process transmitter
48