Endress+Hauser RMA 422 - 5.5 Alarm Set Points;Fault Monitoring (Continued); Alarm Operation Examples and Time Delay

Parameter Setting up selections
Default
settings
Actual
setting
* Reset threshold
RESP1 / RESP2
Enter the reset threshold on
trend monitoring.
Value:
-19999 to 99999
0,0
* Hysteresis
HYST1 / HYST2
Enter the set point hysteresis
on minimum/ maximum
safety.
Value:
-19999 to 99999
0,0
* Time delay
DELY1 / DELY2
Setting the limit event time
delay after reaching the set
point.
Value:
0to99s
The time delay can be set
up in 1s steps.
0
On alarm message the time delay is “0" !
* Time
trend monitoring
TRDT1 / TRDT2
The preset value is used as
the time base for trend
monitoring.
Value:
0to99s
Set up in 1s steps.
0
Process transmitter
56