Endress+Hauser RMS 621 - Page 32

6 Commissioning RMS 621
32 Endress+Hauser
5. Once the outputs have been defined the unit set-up is complete. The request "Quick Setup
will now end. Accept the changes made?". Acknowledge this request. Quick Setup is then
ended.
6. The unit is now ready for operation and a group containing preset parameters appears in the
display. A further group with preset parameters can be called up using Display/Group.
!
Note!
Please note the use of the double arrow function in the Quick Setup. Access to the next window in
the operating structure is done using the double arrow right. To return the previous window use
the double arrow left.
!
Note!
In the Quick Setup the inputs are automatically allocated free connection terminals. Please take note
of these terminations when connecting the sensors or change the terminal selection in the set-up.