SS2100i-1 analyzer
5–6 4900002260 rev. B 12-20-17
Potentially Hazardous Substances
SS2100i-1 analyzers may be provided with a scrubber and scrubber indicator.
See below for proper disposal of these items.
Disposal of Hazardous Substances
For analyzer equipped with H
2
S scrubbers, use the following instruction for safe
disposal of old components.
Depleted H
2
S scrubbers and scrubber indicators contain
predominantly Copper (II) Sulfide [CAS# 1317-40-4] with some
remaining Copper (II) Oxide [CAS# 1317-38-0] and basic cupric
carbonate [CAS# 12069-69-1], each of which are odorless dark
powders that require few special precautions other than avoiding
contact with the internal substances, keeping the scrubber tightly
sealed and protecting the contents against humidity.
Figure 5–5 Accessing the measurement cell
To Next Page
Loading...
