Default Schedule
The thermostat’s schedule is factory programmed with Energy Efficient START TIMES and
SETPOINTS (listed below).
Note: A SETPOINT has a pre-set name and specifies both heating and cooling target
temperatures, as explained in detail in the Temperature Settings section.
This default schedule may be modified as desired to meet your comfort and schedule requirements.
The thermostat anticipates the time required to reach a desired temperature prior to the start of the
SETPOINT time; therefore, you only need to set the desired time for the SETPOINT temperature.
SCHEDULE – Fahrenheit Scale
Mon. to Fri. Sat. & Sun.
START
TIMES
SETPOINT
START
TIMES
SETPOINT
NAME HEAT COOL NAME HEAT COOL
6:00 am Wake
70.0°F 78.0°F
8:00 am
Wake 70.0°F 78.0°F
8:00 am Leave
62.0°F 85.0°F
6:00 pm Return
70.0°F 78.0°F
11:00 pm
Sleep 62.0°F 82.0°F
10:00 pm Sleep
62.0°F 82.0°F
Page 12
To Next Page
Loading...
