Setting the Date & Time
When the communications link is active, the network periodically updates the date and time and
you will be prevented from modifying this setting. If the communications link is off, you can set the
current date and time by selecting the TIME menu item from the USER OPTIONS menu. Using the
same menu item, you can also change between a 12H or 24H clock format.
Press the MENU / SELECT button to view the MAIN MENU as
shown in this screen.
Use the SCROLL buttons to scroll to the USER OPTIONS menu
item. Press again the MENU / SELECT button.
The USER OPTIONS menu will appear as shown at the left.
Use the SCROLL down button to scroll to the TIME menu item.
Press the MENU / SELECT button to enter the TIME screen.
Page 26
To Next Page
Loading...
