User Configuration Reset
The USER CONFIGURATION RESET will only restore the following settings to the factory default
values listed in the previous Thermostat Reset section:
• SETPOINTS
• SCHEDULE
• COMFORT SETTING
CLOCK FORMAT
• LANGUAGE
• TEMPERATURE UNITS
Security Keys Reset
The thermostat ships from the factory with an initial security key that allows the thermostat to set an
initial temporary connection with the utility. This connection is used so that the thermostat and the
utility can set a permanent secured connection that replaces the initial security key. If this
permanent secured connection fails, it may become necessary for both the thermostat and the
utility to start again from the initial security key to set a new permanent connection
The SECURITY KEYS RESET operation is performed locally at the thermostat after entering the
Installer Password. This operation resets the link status to factory defaults by clearing the pre-
shared link key, causing a join operation to be activated.
Page 56
To Next Page
Loading...
