Need help?Do you have a question about the Energate Z100 and is the answer not in the manual?
Explains how to use the thermostat's buttons and navigate its interface for basic operation.
Details the main display showing current temperature, time, and operational status.
Outlines the factory-programmed energy-efficient schedule for heating and cooling.
Allows users to temporarily override the programmed schedule for immediate comfort adjustments.
Explains the various operational modes like AUTO, HEAT, COOL, OFF, and EMERGENCY.
Explains how to modify heating and cooling target temperatures for different setpoints.
Details how to view, change, and edit heating/cooling target temperatures for setpoints.
Explains how to define daily schedules, set start times, and assign setpoints.
Covers permanent, timed, and temporary holds to override the schedule.
Provides instructions for mounting the thermostat at the recommended height and location.
Details the procedure for replacing the thermostat's internal backup battery.
Illustrates the correct wiring connections for conventional and heat pump systems.
Explains how to access the setup menu and its password protection levels.
Covers the USER and INSTALLER password levels, defaults, and changes.
Defines the permissible minimum and maximum temperature limits for setpoints.
Critical step to match thermostat settings to the specific HVAC system type.
General| Display | LCD |
|---|---|
| Type | Programmable |
| Power Source | Battery |
| Mobile App | Yes |
| Control | Remote |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Range | 5% to 95% (non-condensing) |
To Next Page
