Page 53
Device Info Screen
The Device Info screen is a read-only screen that is available through the Setup menu. The
Installer password must be entered to access the screen.
This screen provides the following information for the Thermostat:
OS NUMBER: this is a number that identifies the name and version of the Thermostat
Firmware (Operating Software).
HARDWARE: the Thermostat Hardware version Major and Minor, separated by a dot.
Both are numbers from 0 to 255.
SOFTWARE: the Thermostat Firmware Version Major, Minor, Build and Branch, as
numbers from 0 to 254 each, separated by dots.
TIMESTAMP: the build date and time of the thermostat firmware.
BOOT LOADER: the version, build and CRC of the thermostat boot loader firmware.
CONFIG ID: Customer Configuration File Identification Number and Version. Both are
numbers from 0 to 255, separated by a dot. When no Customer Configuration File has
been programmed, the Value shown will be NOT AVAILABLE. In this case, the standard
Energate default values will be used.
To Next Page
Loading...
