Page 40
Service Information
Information regarding your service contractor can be programmed into the thermostat for future
reference from the SERVICE screen, which can be accessed through the USER OPTIONS menu.
Choose SERVICE from the USER OPTIONS menu.
Press EDIT NAME and enter the name and contact information
using the MENU / SELECT button to navigate to each letter
position and the SCROLL buttons to change each letter.
After pressing SAVE CHANGES scroll to the next line if you need
to enter additional information; then follow the procedure just
described.
Power Outages
In the event of a power failure, the thermostat will retain information for proper operation of the
heating and cooling equipment as well as maintaining the time. It will not display information on the
display screen during the power outage. Once the power is restored, the thermostat will continue
operation maintaining all previously stored settings.
To Next Page
Loading...
