Conservation Screen
The Conservation Screen allows you to choose your desired comfort level (i.e. from maximum
comfort and no savings to maximum savings and minimum comfort). Please note that not all utilities
provide price information over the communications link so this screen may not be activated for your
program. To use the Conservation Screen, you need to access the Main Menu and then press the
MENU / SELECT button when the cursor is on the COMFORT menu item. This takes you to the
Conservation Screen, where you can see the following:
Once on the Conservation Screen, you can choose the level of
Comfort by pressing the arrow (SCROLL) buttons. If you choose
the Maximum Comfort, as shown at the left, your program
settings will not be affected by an increase in price (i.e., you are
prepared to pay the increased rates to maintain your desired
comfort level).
By continuing to press the arrow buttons, you can also choose
Comfort, as it is shown on the left. In this setting the thermostat
adjusts the temperature settings such that there is little or no
adjustments when the price goes up by a small amount, but when
rates go higher so do the adjustments; however, this setting
favors comfort over savings.
By choosing the Balanced Level, price increases and
temperature adjustments strike a balance between comfort and
savings.
Page 32
To Next Page
Loading...
