33
IOM, XT Models Enertech Global
⚠ CAUTION ⚠
CUT HAZARD
FAILURE TO FOLLOW THIS CAUTION MAY
RESULT IN PERSONAL INJURY.
SHEET METAL PARTS MAY HAVE SHARP EDGES
OR BURRS. USE CARE AND WEAR PROTECTIVE
CLOTHING AND GLOVES WHEN HANDLING
PARTS.
⚠ WARNING ⚠
ELECTRICAL SHOCK HAZARD
FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN PERSONAL INJURY OR DEATH.
BEFORE INSTALLING, MODIFYING, OR
SERVICING SYSTEM, MAIN ELECTRICAL
DISCONNECT SWITCH MUST BE IN THE OFF
POSITION.
THERE MAY BE MORE THAN ONE DISCONNECT
SWITCH. LOCK OUT
AND TAG SWITCH WITH SUITABLE WARNING
LABEL.
Figure 1: Heater Installation
Representative drawing only, some models may vary in appearance.
Section 7: Auxiliary Heater Installation
Representative drawing only, some models may vary in appearance.
Heater Support Rod Fits into Hole
Rotate Circuit
Breakers 180 Degrees
for RH Airow
To Next Page
Loading...
