EnGenius ENH700EXT - Configuring Microsoft Windows Vista

14
3. In the Networking tab, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
4. In the properties dialog box, click Use the following IP address: to configure your
computer for Static TCP/IP. Enter an IP address (i.e. 192.168.1.10), the subnet mask of the
ENH700EXT, and the default gateway which is the ENH700EXT’s IP address, 192.168.1.1. Note:
the subnet mask must match that of the ENH700EXT and the IP address must be on that subnet.
5. Click the OK button to save your changes and close the dialog box.
6. Click the OK button again to save your changes.
Configuring Microsoft® Windows Vista
Use the following procedure to configure a computer running Microsoft
®
Windows Vista with
the default Windows interface.
1. On the Windows taskbar, click Start, click Control Panel, and then select the Network
and Internet icon.
2. Click View Network Status and tasks and then click Manage Networks Connections.
3. Right-click the Local Area Connection icon and click Properties.
4. Click Continue. The Local Area Connection Properties dialog box appears.