ENGINEERING
Page 14
Omniguard™ 4
To disable or silence the buzzer--
Press ALARM SILENCE once and the alarm will be
disabled. This will be indicated on the screen with an X
marking through the buzzer symbol. If the alarm was
sounding at the time of disabling it will become silent.
To rearm a silenced buzzer --
Press ALARM SILENCE and the buzzer symbol will be
displayed without an X through it.
Turning Printer On/Off
The PRINTER ON/OFF key controls the printer power. All pressure
readings are logged to memory regardless of printer setting.
Note: If a printer error is detected, the printer will
automatically turn off and a
JAM
message will
appear above the printer symbol. Clear the jam
and use the
PRINTER ON/OFF
key to turn the
printer back on. Paper jams are logged with a
time-stamp.
Viewing/Printing Jobs & the Print Job Key
The
Omniguard 4
provides a printout of all recorded data, alarm
messages and changes in operational settings. The current Job or
any previous Job (or portions of those jobs) and the
Omniguard
’
s
Configuration Report can be printed at anytime.
Print Job Key --
Pressing PRINT JOB will print a specific report for the current Job
(preselected in the PRINT JOB KEY SETUP menu item). This makes
it easy to print a particular portion of the current Job on a daily or
other basis.
To view or print a Job Log --
1. Press MENU to view the Main Menu.
2. Highlight VIEW/PRINT JOB LOGS using ▲/▼ and press SELECT.
3. The selected Job Log will appear on the screen for viewing. Press
the PRINT JOB key at any time while viewing the report and the
Job Report will begin printing.
Alarm Symbols
Armed
Disabled or
Silenced
Jammed
On
Off
Printer Symbols
To Next Page
Loading...
