SOLUTIONS
Page 15
Owner’s Manual
Printing a log does not cause any data to be erased from memory.
Cancel printing by pressing any key.
Configuration Report
The
Omniguard 4
provides a report of all of the unit’s current
settings (Alarm Setpoints, Log Rates, etc.) and the current system
information (memory status, unit serial number, etc.). This report
can be viewed and printed at any time.
To view or print the Configuration Report --
1. Press MENU to view the Main Menu.
2. Highlight CONFIGURATION REPORT using ▲/▼ and press
SELECT.
3. The Configuration Report will appear in its entirety on the screen
for viewing. Press the PRINT JOB key and the Configuration
Report will begin printing.
Printing a report does not cause any data to be erased from memory.
Cancel report printing by pressing any key.
Example of Typical Job Printout
Typical startup sequence
Setting changes print for verification
Containment pressure reached
operating window... Normal OP
Alarm Condition (Alarm 1 tripped)
Back into Normal Operation
New Date prints at midnight
Signoff header
POWER OFF
11-21-03 19:48:39
CURRENT JOB
Johnson Bldg
OMNIGUARD 4
11-26-03 08:02:20
ALARM 1 @ -0.025" WC
ALARM 2 @ -0.100" WC
NEW TIME
05:38:00
NEW ALARM 2
-0.090" WC
NORMAL OP 05:51:24
TIME HI "WC LO "WC
06:06 -0.032 -0.028
06:21 -0.031 -0.027
06:36 -0.033 -0.028
ALARM 1 @-0.025" WC
08:51:26 -0.012" WC
08:51:41 -0.002" WC
NORMAL OP 08:51:55
TIME HI "WC LO "WC
09:06 -0.032 -0.028
11-27-03
TIME HI "WC LO "WC
00:06 -0.032 -0.028
JOB REPORT
11-27-03 08:33:24
JOB NAME:
Johnson Bldg
____________________
CONTRACTOR:
Acme Abatement
____________________
SUPERVISOR:
____________________
JOB SUMMARY
JOB NAME:
Johnson Bldg
JOB START:
11-26-03 05:38
JOB END:
12-01-03 17:09
TIME IN NORMAL OP:
5 days 10 hrs 23 mins
NUMBER OF ALARMS:
2
TIME IN ALARM:
16 mins 28 secs
Example of Job
Summary Printout
To Next Page
Loading...
