ENGINEERING
Page 30
Omniguard™ 4
Appendix D: Limited Warranty
Engineering Solutions warrants that all products, component parts
and accessories will, for a period of twelve (12) months from date
of purchase, be free from defects in material and workmanship
under normal use and service.
PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF
DEFECTIVE PARTS F.O.B., ENGINEERING SOLUTIONS, INC., 6000
SOUTHCENTER BLVD, SUITE 70, TUKWILA, WA 98188.
To keep this warranty valid, the purchaser must (a) return signed
Registration card to Engineering Solutions within fifteen (15) days
of purchase, (b) have promptly informed Engineering Solutions’
customer service department of any defects in writing, (c) properly
used, maintained and repaired the Product, and (d) have proof of
purchase.
This warranty does not cover normal wear and tear or defects due
to (a) improper or negligent handling or unauthorized modifications,
(b) defective or improper premises, chemical, electrochemical or
electrical influences, (c) weather or other influences of nature.
LIMITATIONS OF WARRANTY - THIS WARRANTY IS EXPRESSLY
IN LIEU OF ANY AND ALL OTHER WARRANTIES AND OBLIGATIONS
OF ENGINEERING SOLUTIONS OR ITS SUPPLIERS, EXPRESS OR
IMPLIED. ENGINEERING SOLUTIONS EXPRESSLY DISCLAIMS
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE.
LIMITATION OF REMEDY- Under no circumstances shall Engineering
Solutions or any of its suppliers be liable for any loss or damage,
including, but not limited to, loss or damage arising out of failure of
the Product to operate for any period of time, inconvenience, use of
rental or replacement equipment, loss of profit or other economic
loss, or general, direct, special, indirect, incidental or consequential
damages or property damages.
PRODUCT SUITABILITY - Many states and localities have codes and
regulations governing sales, construction, installation, and/or use
of products for certain purposes, which may vary from those in
neighboring areas. While Engineering Solutions attempts to assure
that its Products comply with such codes, it cannot guarantee
compliance, and cannot be responsible for how the Products are
installed or used. Engineering Solutions recommends that, before
purchasing and using a Product, purchasers review the Product
application, and federal, state and local regulations, to be sure that
the Product, installation, and use will comply with them.
To Next Page
Loading...
