enphase M250 User Manual

M-Series Microinverter Installation and Operation
 2016 Enphase Energy. All rights reserved. 141-00024 Rev 02b
37
M215-60-230-S22 Specifications
M215-60-230-S22
Enphase M215-60-230-S22 Microinverter
Topic
Unit
Min
Typical
Max
DC Parameters
Recommended maximum input power
W
270
MPPT voltage range
V
22
29
36
Operating range
V
16
36
Maximum DC input voltage
V
45
Minimum / Maximum start voltage
V
22
45
Maximum DC input short circuit current
A
15
Maximum DC input current
A
10.5
AC Parameters
Peak AC output power
W
225
Maximum AC output Power (-40 to 65
C)
W
215
Output power factor
0.95
0.99
1
Nominal AC output voltage
230
Nominal AC output current, 230 Vac
A
.94
Number of AC phases
1
Operational Data
Maximum microinverters per 20 amp AC
branch circuit
230 Vac
400 Vac (three-phase)
400 Vac (three-phase, centre
fed)
1
1
1
17
27
51
Total Harmonic Distortion
%
3.0
5
Internal operating temperature range
C
-40
85
External (ambient) operating
temperature range
C
-40
65
Efficiency
EN50530 weighted efficiency (EU)
%
95.4
Static MPPT efficiency (weighted, EN
50530)
%
99.6
Dynamic MPPT efficiency (weighted, EN
50530) slow irradiation changes
%
99.3
Dynamic MPPT efficiency (weighted, EN
50530) fast irradiation changes
%
99.3
Dynamic MPPT efficiency (weighted, EN
50530) start up and shut down
%
99.8
Night Tare Loss
mW
50
Dimensions and Weight
Dimensions, not including mounting
bracket (approximate)
17.2 cm x 16.4 cm x 2.5 cm
Weight
1.6 Kg

enphase M250 Specifications

General

Model	M250
Manufacturer	Enphase Energy
Efficiency	96.5%
Output Voltage	240 V
Operating Temperature Range	-40°C to +65°C
Maximum Output Current	1.04 A
CEC Efficiency	96.0%
Start-up Voltage	22 V
Output Frequency	60 Hz
Enclosure Rating	IP67
Weight	1.6 kg