32
IP1861EN - 2015-12-02
7. Mechanical installation
Unless otherwise specified, all measurements are expressed in mm.
- If the surface does not allow the cabinet to be fastened strongly and firmly, prepare a con-
crete base with embedded anchor ties and QIKZ base plate which must be level and clean.
- Insert elements made of iron or another material in the anchor ties to attach the ties to the
concrete reinforcement.
- Pass the cable ducts through the central hole of the plate.
WARNING: make sure that the fastening is strong and firm.
- Secure the cabinet.
i
N.B.: to open the cabinet, release the automation as described on page 40 and unscrew the
4 screws on the front.
700
500
600
400
600
300
210
115
230
Ø12,5
Ø60
To Next Page
Loading...