ENVISION GLASSES ENVISIONER’S GUIDE 15
How to assemble the Envision Glasses
3.3.1 Detaching the frame
1. Take your Envision Glasses off and make sure they stay unfolded. This means
that the area containing the camera and display is perpendicular to the body.
2. Hold the frame with your left hand and the body with your right hand.
3. While holding the body in your right hand, make sure your thumb is on the
top part of the body, in the area before it curves to the front. Make sure your
index finger is behind the part where the camera and glass plate are located.
4. There is a button on the body around the area where your thumb and index
are located. Press this button with your thumb.
5. Now, with your left hand, rotate the frame counter-clockwise.
6. Push down with your thumb on the connected piece of the frame and body,
then push away with your index finger.
3.3.2 Attaching the frame
1. Make sure the frame is unfolded.
2. Make sure that the body has also been unfolded so that the area containing
the camera and display are extended perpendicular to the arm.
3. Hold the frame in your left hand and the body in your right. When holding
To Next Page
Loading...
Need help?
General