ENVISION GLASSES ENVISIONER’S GUIDE 19
How to unpair your Envision Glasses
That’s it! You will now see the Pairing dashboard again shown in the image above
and can click on ‘Start pairing process’ to start the pairing process with your glasses.
3.6 Welcome to the Envision Glasses!
At this point, you may go through the ‘Gestures Training’ on the Envision Glasses. In
this tutorial, you will learn where the touchpad is located and how to use the swipe
and tap gestures.
Note: if the Gestures Training did not start on the Envision Glasses, it means the
pairing was not completed. In that case turn off the Envision Glasses and turn them
on again.
To Next Page
Loading...
Need help?
General