55
Operator's instructions
4. Controls
The message is shown if the wrong button/button combination is held depressed when
the box is started.
o
Restart the radio box.
The message is shown in the event of a fault in the button.
o
Go to test mode to check the buttons.
Inclination error
The message is shown in the event of unpermitted inclination of the radio box. The box
loses control and shuts down the current function.
o
Set the radio box correctly. The message disappears and control of the radio
box
is restored.
Internal fault
The message is shown in the event of a fault in the radio box.
o
If the error message remains after restart, contact the Epiroc service or-
ganisation.
The message is also shown if the switch (touch button 12) has to be depressed to take
control with the radio box.
To Next Page
Loading...
