61
Operator's instructions
5. Operating
6. Operating
Activating the remote control box
Danger of accidental operation
May cause serious personal injury and damage to
property
The operator must always have an overview of the
drill rig and the remote control box
Always check that the controls are correctly
adjusted before operating
Always deactivate the remote control box when not
in use
NOTE: Monitor pressure gauges and display for diesel engine when in operation.
NOTE: Always have the drill rig and the remote control box under surveillance.
NOTE: If the remote control box is turned off once the system has been activated, the diesel engine will stop and
deactivate the whole drill rig.
1. Activate the drill rig's main power contactor. Switch (S300) in position (1a).
Main power contactor S300
To Next Page
Loading...
Need help?
General
