EasyManua.ls Logo

Epiroc FlexiROC T20 R - Winch Operation During Tramming

Epiroc FlexiROC T20 R
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
Operator's instructions
5. Operating
Using the winch when tramming
Serious injury
Risk from dumping and moving parts
May cause serious personal injury and damage to
property
Ensure that unauthorized personnel are outside of the
working area
Never use the winch with less than three turns
remaining on the winch drum
Risk from dumping and cable failure
May cause serious personal injury and damage to
property
The anchorage point must be firm and secure (pay
attention to local regulations)
The safety hook must not be able to slide or detach from
its attachment point
A damaged cable or hook must not be used. See the
section, Wire ropes, in the main
tenance instructions.
Check that the winch locking mechanism is fully
engaged in the drum before use, following the
attachment of the cable eye on the anchorage point
May cause serious personal injury and damage to
property
The operator must always have an overview of the drill
rig and the remote control box
Always check that the controls are correctly adjusted
before operating
Always deactivate the remote control box when not in
use
The remote control box must not be operated from the
drill rig when the winch is being
used

Table of Contents

Related product manuals