Epiroc FlexiROC T20 R - Unthreading and Extracting

91
Operator's instructions
7. Drilling
Sector description - Right-hand multifunction lever
6. Unthread the shank adapter from the drill rod.
Unthreading and extracting

Danger of accidental operation
 May cause serious personal injury and
damage to property
 The operator must always control of the rig
and the remote control box
 Always check that the controls are
correctly adjusted before operating
 Always deactivate the remote control box
when it is not in use
1. Make sure the shank joints are broken loose.