57
Operator's instructions
4. Controls
Stops
The system is switched off as follows.
1. Switch off the diesel engine with button (C).
2. Switch off the radio box with button (E)
3. Switch off the CAN system with the key.
Drilling
For information about drilling, see the operator's instructions.
Stop drilling/rotation
The following functions for stopping drilling/rotation are unique to the radio box.
Stop drilling/rotation function
Move the right-hand multifunction lever to sector (B) to stop drilling/rotation.
Stop drilling/rotation function in adjustment mode
In the event of repositioning during ongoing drilling (adjustment) the levers are inactive after 5
seconds, except the stop drilling/rotation function. It operates after 5 seconds.
To Next Page
Loading...
Need help?
General
