Epiroc FlexiROC T20 R User Manual

97
8. Options
NOTE: you can adjust the water flow from the regulator A show in the picture and the
water pressure from the regulator B .
NOTE: In case of cold temperature, it is recommended to drain the water system by
opening all the valves A in the picture below and activating flushing with air.
NOTE: In case the water pressure is connected in input, A it is already too high and you
don’t need the pump, you can switch off it from the button 16 on the radio box.
Operator's instructions

Epiroc FlexiROC T20 R Specifications

General

Brand	Epiroc
Model	FlexiROC T20 R
Category	Construction Equipment
Language	English