21
Avoid battery short-circuit during connection.
Do not short-circuit the main switch with other power supplies. The main switch
should be mounted on the boat, and the back plate of the main switch should
not be removed.
NAVY Evo outboard motor will stop once the power cable disconnects.
Use communication cables to connect E Series Batteries when multiple E Series
Batteries are used in parallel.
Clockwisely rotate the main switch to power on the battery before use.
Users can also enlarge the battery capacity by connecting multiple batteries in
parallel.
The main switch and the power cable are connected by the xing screws that
may loosen after long-time use. Loosen screws will lead to poor contact, which
may result in overcurrent or other errors. If this problem is discovered, open the
back cover of the switch, and tighten the screws inside.
To Next Page
Loading...
