52
14 Transportation and Storage
14.1 Transport
For long distance transport, please use the ePropulsion original packing materials to
pack the outboard before delivery.
Figure 14-1
14.2 Placement
When placing the outboard on a surface, ensure the surface is at and horizontal. It’s
better to put some damping cushion underneath.
14.3 Storage
If you are not using the outboard motor for more than 2 months, it’s advised to con-
tact your dealer to clean and check the outboard prior to storage. It’s recommended
to pack the outboard with ePropulsion original packing materials for storage.
Get adequate damping protection measures before transport and storage. And
ensure the propeller receives no pressure if the propeller is mounted on the pro-
peller shaft.
Store the outboard in a well-ventilated and dry area without direct sunshine.
Ensure the ambient temperature is proper (-25°C~50°C) during storage.
To Next Page
Loading...
