ePropulsion NAVY Evo - NAVY Evo Maintenance Procedures; 13.1 General Maintenance Notes; 13.2 Maintenance Schedule

49
13 Maintenance
13.1 Notes
Disconnect the battery from outboard before maintenance.
Conduct the maintenance under instructions of professional experts or your
dealer.
Only use ePropulsion original components for replacement and maintenance.
13.2 Maintenance Time Table
Regularly maintained in proper manner and used in normal condition, the outboard
can work at its optimal state. The following table shows a general maintenance fre-
quency, which however may vary according to operating conditions.
Item Operations
Initial Every
50 hours
(3 months)
100 hours
(6 months)
200 hours
(12 months)
Anode Check/Replace
□ □ ■
Propeller
and pin
Check/Replace
□ □ ■
The “
□
” symbol indicates checks may be carried out by users. The “
■
” symbol
indicates work to be carried out by your dealer.
Regular maintenance is benecial to keep your outboard working in optimal condi-
tion.
Do not start the outboard in shallow or unknown water conditions. Only use the out-
board in deep water area.
In order to clean and reduce corrosion, use fresh water to wash the whole outboard
after use in salt water.