17
3.3 Mounting the Steering System
Before using Evo Remote Control, please follow the xing guide to x the Evo Re-
mote Control in the proper position.
When using the Evo Remote Control, please prepare a steering wheel (not supplied
with NAVY Evo or the Evo Remote Control) and mount it on the corresponding posi-
tion to control the direction.
Step2: Mount the Link arm with
two M8 nuts.
Step3: Fasten the steering wheel
shaft on the steering tube
with thread.
Step1: Insert the steering wheel
shaft into the steering tube.
Figure 3-3
3.4 Mounting the Evo Tiller
1. Rotate the handle shaft counterclockwise, then pull out the handle shaft and
decorative cover.
Figure 3-4
To Next Page
Loading...
