32
Recalibration process LCD Displaying
Step4: Pull the throttle to the maximum backward power
position, then press " " button. “CAL FO” will display
and calibration is completed. A blinking “RESET” will dis-
play to remind you to reset the throttle to zero position.
Step5: Push the throttle to zero position and press the “
” button and return to the main page.
5.4 Use of Kill Switch
• Attach the kill switch and tie its lanyard to your wrist or life jacket.
• Stop the outboard in emergency by detaching the kill switch.
• To run the motor again, first attach the kill switch then start the motor.
Figure 5-8
The kill switch generates magnetic field. Keep it 50cm / 20inches away from
medical implants like pacemakers and magnetic cards (e.g. credit card) as well
as other magnetic media.
The magnetic eld of the kill switch may interfere with some electronic instru-
ments. Keep it away from these electronic instruments.
To Next Page
Loading...
